Check your battery connections and/or batteries. It sounds like the radio is trying to perform the “power on” sequence, but doesn’t have enough power to actually power on. Use fresh from the package or other “known good” batteries, and clean the battery contacts with rubbing alcohol and a clean paper towel.

Signal that the Motorola CDM will provide it. If you have not already done so, install the programming software on to your PC by following the instructions in the 2012/Merlin service manual. Start running the Pyramid 2012/Merlin programming software on your PC. From the Data pull down menu, under the System Data screen, program the unit as.

If there is corrosion or other oxidation on the contacts, you may need to use an emery board and then the alcohol wipe. Beyond that, the radio is not really “user serviceable”. Is there any chance the malfunctioning radio was exposed to water? Answered on Mar 02, 2019 18 views.

A few things come to mind: 1) Be certain your radio is turned off when plugging in an audio device. This insures they are pairing properly. 2) Be certain the audio device is plugged in all the way to the click position. You should feel a slight click when it is seated properly. 3d max free download for windows 7. 3) If the jack on this radio is slightly wobbled out from audio devices being plugged and unplugged the headset's plug may not be touching the sweet spot to make transmitting possible. Press slightly to the side on the plug's grommet to see if it works. If this is the case, trade headsets with another unit and see if you still have the same problem.

Sometimes it is as simple as playing musical chairs with audio devices. 4) If you are using the radio in digital mode, not all audio devices will work. Check with your Motorola dealer to see which audio accessories will work with your unit in digital mode. (They will have a digital emblem stamped on them.) Answered on Jan 14, 2019 108 views. Generally the manufacturer puts the Bluetooth pairing passcode in the user manual.

In my experience it’s usually 0000 or something similar. Unfortunately I wasn’t able to find the manual online to get the information for you, but if you still have the manual that came with the device, it should be in there.

If you don’t have access to the manual, you could try calling the manufacturer’s support number to request the code—it will be the same for all devices with that model number so it should be pretty easy for them to look up. Answered on Dec 27, 2018 41 views. Press and hold the Menu button (the center section with the + and - buttons to the sides) until you hear a beep (3 seconds or so). After that, when you press and release the Menu button, the Channel number should flash indicating that you can change the channel. In the future, you can toggle the keypad lock by pressing and holding the Menu button. You can find more information on the Keypad Lock feature in the manual.

See page 14 and page 21. The manual is available from ManualsLib:. For the diagram of the Motorola Talkabout T5320, see.

The Keypad Lock is described here:. I hope this helps. I usually use my Motorola Talkabout radios with the keypad lock active.

I hit the various button accidentally when working in the field. Cindy Wells Answered on Aug 28, 2018 152 views.